Laser obstacle removal (power grid, remote foreign body removal) technology has now gradually become popular and applied to the work of power grid, but many electric workers are still unable to use highly professional laser obstacle remover.
Today, Xiaote will instruct you to understand the use of laser obstacle remover and precautions. After a few minutes, you can become a "master" from "freshman".
Know laser obstacle remover
To use laser obstacle remover well, there is no doubt that you must first understand it in detail. The laser obstacle remover is divided into two parts, obstacle remover main body and portable mobile DC power supply.
Open the main body outer box and you can clearly see the main part of laser obstacle remover, including tripod head, tripod and emitter.
In addition, the main outer box includes the power start button, power indicator light, start indicator light, laser safety alarm and emergency stop button, which are necessary indicators and commonly used buttons for laser obstacle remover.
tripod head, power ON, tripod, emitter, emergency button, power indicator, laser safety alarm, ON indicator
In addition to being easy to carry, the dedicated portable mobile DC power supply also uses an electronic screen to display the residual power, output voltage, whether there is a fault and other information in real time, allowing you to grasp the use of obstacle remover anytime and anywhere.
Portable mobile DC power supply
Mounted laser obstacle remover
STEP 1
Remove the tripod from the main outer box and mount it on the ground smoothly. Then mount the tripod head onto the tripod (align the bottom of the tripod head with the bracket slot) and lock it securely.
Then insert the tripod head cable into the corresponding port on the side of the main box.
Then remove the emitter and secure and lock it to the tripod head link with the bottom aligned to the tripod head slot.
Laser obstacle remover is installed correctly as shown in the above figure.
STEP 2
Insert each end of the power cable into the port on the portable mobile DC power supply and the port on the host outer box (both ends of the power cable are the same, without plus or minus).
Portable mobile DC power port.
Insert both ends of the power cable into the power supply and main chassis separately and rotate to lock.
Host outer interface
Laser obstacle remover is correctly connected to portable power supply as shown in the figure below.
On-site presentation for obstacle removal operation
STEP 1
After arriving at the removal site, mount the laser obstacle remover according to the instruction above.
Next, connect and log in laser obstacle remover using a dedicated tablet PC.
Open setup options on tablet PC and connect laser obstacle remover host internal LAN WIFI.
Once the connection is complete, log into the laser obstacle remover APP for operation.
STEP 2
Rangefinder ranging. First use rangefinder to range the distance between unobstructed target and equipment.
Rangefinder measures distance between removal target and device.
STEP 3
Aim at the target. As shown in the following figure, zoom the lens 30 × by moving the launcher with the arrow keys and aligning the obstacle removal target.
STEP 4
Adjust parameters. Enter the “Distance” menu to select the distance corresponding to the target and click “Execute” to confirm the parameter. Then open the “Power” menu, select the appropriate power and click “OK”.
STEP 5
Start obstacle removal operation. Remove the target by moving the laser spot with the arrow keys. (UAV has been used to confirm absence of birds in bird's nest prior to remove obstacle).
Moving the laser spot through the arrow keys to clear the target.
Caution! After completing obstacle removal operation, carefully inspect the surrounding environment to ensure that there are no fire hazards before leaving the scene.
Laser obstacle removal (power grid remote foreign body removal) technology has now gradually become popular and applied to the work of power grid, and it is believed that more and more power workers can use this advanced equipment.
Please share this article with everyone around you who needs it, within 5 minutes, they will become laser obstacle remover "master."
